ice maker evaporator

Introduction of ROBIN flake ice evaporator: Flake ice evaporator is a main part of flake ice machine, generally it includes flake ice drum, ice blade, reducer, main axle, upper & bottom pedestals, water dispenser, water tank, water pump, brine pump and support frame. ---Fresh water type evaporator, ice drum inner surface is chromed steel, outer stainless steel, pedestals are aluminum alloy ---Seawater type evaporator, all components contacting with water are made of stainless steel SUS316. Refrigerant can be R22,R404A or R507A...else. Robin flake ice evaporator daily capacity ranges from 200kg to 30 tons.

The evaporator is a vertical drum structure, composed of ice - making main components, ice cutter, main shaft, water separator, baffle plate. They rotate slowly counterclockwise with the help of the speed reducer. Water enters the water separator from the inlet of the ice-making machine evaporator, and is evenly sprinkled on the inner wall of the evaporator through the sprinkling pipe to form a water film. The heat exchange between the water film and the refrigerant in the evaporator flow passage results in a rapid decrease of temperature, which forms a thin layer of ice on the inner wall of the evaporator. Under the pressure of the ice knife, the water film breaks into pieces of ice and falls into the ice house from the water mouth. Part of the unfrozen water flows back to the cold water tank through the baffle and enters the next cycle through the cold water circulation pump.