ice machine

Robin marine seawater flake ice machine use sea water to make ice. The biggest difference between fresh water flake ice machines is the design of the material and the compressor of the ice making machine. As the inlet of marine seawater flake ice machine is sea water, in order to overcome the corrosion of seawater, marine seawater flake ice machine adopts special pipe material. At the same time, in order to overcome the problem of ship sailing violently at sea, the deepen oil tank piston compressor has been used, even when the ship is inclined 30 degrees, it can work normally.

2 ton Tube ice is a kind of hollow cylindrical ice with external diameter ø22、ø29、ø35mm and length 25～42mm. The hole diameter is usually ø5～10mm and it can be adjusted according to ice making time. Features: Tube ice is thick and transparent with long storage period. It isn't likely to melt in a short time. Application: Daily eating, keeping vegetable and seafood fresh, etc.

*Ice production 2 Ton Per Day *Sea Water *Water Cooling System *Flake Ice Thickness:1.5-2.2mm *Refrigerant: R22/R404A *With PLC Controller

ROBIN 2Ton Sea water Flake ice making machine is a smaller capacity 2 Ton per 24 hours machine,the ice flakes are from sea water directly.Our China Seawater Flake Ice Machine for fishing boat use is professionally applied into deep-sea fishing, seafood preservation and distribution industries, etc.

ROBIN marine flake ice machine had undergone a stringent inspection procedure which lasts several months, including examination of schematic drawing, product performance, component structure, electric control and alarm system, operating system, fabricating criteria, evaporator pressure and withstanding voltage. These examinations are done to make sure the ice machines inspected are robust, stable and suitable for ocean going navigation.

Sea water type flake ice machine is always used on marine fishing, or use on sea side land. It can use fresh water or sea water cooling. It adopts high quality SS 316 to avoid corrosion. During ocean shipping, can make ice by seawater directly. Also make heat exchange visa the condenser.

1. Adopt PLC program centralized control, auto water supplying and auto ice dropping. 2. Large production, block ice clean, beautiful and sanitary to edible 3. Take a little space, convenient to transport 4. Easy operation and convenient transportation, low cost 5. Ice is sanitary, clean and edible 6. Evaporated directly without salt water 7. The material of ice moulds are aluminum plate, mainframe adopts stainless steel, which is anti-rust and anti-corrosive.

The small capacity tube ice machine, whose capacity ranges from 1 ton/24hrs to 8 ton/24hrs, is a complete unit so it's quite compact and space-saving. All equipments are assembled in the steel frame except cooling tower. Suitable for container shipment, easy to ship, move and install. Can be put into use given water and electricity source. Standard power supply for small capacity tube ice machine is 380V/3P/50Hz and it can be customized to meet different electrical requirements.

20 tons 24 hrs flake ice machine RBSF-20T is widely used in seaport for fish cooling. The seawater type flake ice machine is using anti-corrosion material for evaporator. So it is able to use seawater as water source for ice making. We have built several auto flake ice projects in many countries. The systems are consist of containerized flake ice machine, cold storage with raking system, auto ice weighing system.