ice tube machine

1 ton tube ice machine * All equipment except cooling tower is installed in steel frame. * Meet the requirements of container transportation, easy to transport, move and install. * Easy to use;The site can be put into operation only by providing water source and power source. The standard power supply of the small tube ice machine is 380V/3P/50Hz. The power supply can be changed according to the actual situation, but it must be indicated when ordering.

2 ton Tube ice machine Tube ice is a kind of hollow cylindrical ice with external diameter ø22、ø29、ø35mm and length 25～42mm. The hole diameter is usually ø5～10mm and it can be adjusted according to ice making time. Under PLC program control system to work automatically, the machine has high capacity, low-power consumption, and minimal maintenance.

5 ton tube ice maker has scientific design; It can be air cooling or water cooling * Special design for the ice cutter. *Mature pre-sales and after-sales service *It can make different size tube ice. * Localized after-sales service in some countries. *Provide Installation or After-sales Service Global Wide. *Easy Operation: Fully automatic, easy installation, easy operation, easy maintenance

10 ton Tube ice machine With 10 years' ice making experience, processed and forged by German technology, we provide the ice machine with high quality: 80% of making machines' accessories come from famous brands, ie: compressors from Bitzer, Manevrop, Tecumseh, Frascold, Sanyo, Boke, ice making accessories from Hansen, Danfoss, Emerson, Sporlan, Saginomiya etc. Tube ice introduction: It is a kind of hollow cylindrical ice with external diameter ø22, ø29, ø35mm and length 25~42mm. The hole diameter is usually ø5~10mm and it can be adjusted according to ice making time.

12 ton Tube ice machine Tube ice machine is one kind of ice machine.Because of the irregular length and hollow tube, so we called it tube ice,its inside diameter is 5mm to 15mm , the length is between 25 mm~42mm, there are a variety sizes that can be choosed, the outer diameter of ice are:22,29,32,35mm,etc.This kind of ice iscalled tube ice. Tube ice is round,generous,bright and transparent, so it is welcomed by consumer,it is widely used in modulating drinks, ice beverage,decoration and food fresh keeping,etc

25 Ton ice tube machine features a modular design which makes it easy to install, ship and operate. The whole unit consists of 3 parts: • Evaporator module: the evaporator and its accessories are installed on a steel frame which forms the evaporator module. When transporting, place the evaporator horizontally and stand it upright when installing. • Compressor module: compressor, condenser, reservoir, liquid receiver, oil separator, and electric control box are installed on a steel frame to form the whole set. • Cooling tower module: cooling tower, water pump and water pipes. Standard power supply for large capacity tube ice making machine is 380 V/3 P/50 Hz and it can be customerised.

Robin's tube ice machine, also knowns as tube ice maker, is designed according to pressure vessel standard and CE(PED)ASME certificated. All ice touched parts are made of stainless steel, guaranteeing the sturdiness and sanitation.

Recent years, there has been a trend in the European and American edible ice market. The ice must be exquisite in appearance and strong in melting resistance. Then, solid tube with saw-cut was born. The ice has no holes in the middle, and the melting time is much longer than that of ordinary ice tubes. , The finished alcoholic drinks have a good taste, consumers can taste the original taste of alcoholic drinks, and the ice tube have a high ornamental value. In the next few years, solid tube with saw-cut will gradually be sought after by people all over the world. Jinan Robin Machinery is the only manufacturer of Solid Tube Ice(with flat cut ends) Machine in China. And the price has an absolute advantage than other manufaturer in Europe. Robin saw cut(Solid No Hole)Tube ice machines are the the most recently developed model for high requirement ice user. Our special technology allows a solid frozen tube ice with a saw cutting design to produce clear and delicate clear ice cylinders with flat cut ends.

Working condition： Power supply: full electric system complying with the general international standards. Standard working condition of ice making: water supply temperature 20℃, ambient temperature 33℃ The applicable working condition: water supply temperature 0~35℃, ambient temperature 5~40℃ Refrigerant: R404A、R507A、R717